Dometic Smev 9722 with Piezo or Electric Ignition Full Installation Kit, Truma Regulator & Water ContainerComes with Florenz Cold Tap (Keramik tap for electric ignition).Comes with fitting template without this it will take you 3-4 hours to work out the hole shape and fitting points.Included:1 x 9722 combination unit with twin glass covers1 x Smev 9722 hole template1 x 8 mm EN 1949 Truma regulator with isolation switch and test point Bulkhead mounted1 x Butane gas pigtail1 x 907 camping gas adaptor1 x 8mm compression joint2 x gas vents2m of 8mm copper pipe1 x Comet Florenz micro-switched tap (Keramik for electric ignition)1 x waste outlet and plug1 x 12 lpm submersible pump *upgraded to Seaflo Pump 0.6ba1 x Water Container either 10L, 12L or 20L1 x 2m fresh water pipe1 x 2m waste water pipe1 x 2m twin core wire2 x hose clips6 x wire connector crimpsSize:Length 760mmWidth 325mmSink depth 120mmPlease note gas installations should be fitted and tested by qualified engineers.Probably the most popular Smev unit to fit in campervans and motorhomes.Flush fitting unit with darkened glass protective lids/splashbacks, these units look professional and take up less space than the individual hob and sink units.Stable, removable cooking platforms. Good size practical sink that allows for the micro-switched tap to be hidden under the glass lid when not in use.